Dental Highspeed Handpiece Led Push Triple Spray Torque
Push Turbine with CE
LED High Speed Hand Pieces
standard head / 2 hole/4 hole
LED Airotor HandpieceTech data:
| Name | 160p Dental E-generator handpiece |
| Water Spray | 3 Water Spray |
| Drive air pressure | 0.25-0.3Mpa |
| Water pressure | 0.2Mpa |
| Water pressure | 198Kpa(2kg) |
| Handpiece Hole | 4Holes/2Holes |
| Light brightness | 25500lux |
| Power | 22W |
| Illuminate | LED Light (white light) |
| Rotation speed | 300,000~350,000rpm |
| Head height | 13.0mm |
| Head diameter | Φ12.7mm |
| Chuck type | Push button |
| Clamping force | 22N~34N |
| Torque force | ≥0.1N·cm |
| Bur Applicable | Φ1.59mm-Φ1.60mm*21mm-23mm(diameter*length) |
| Noise | ≤60DB |
LED Airotor Handpiece details:
| 
dynamice balancing correction led lamp imported from Japan Triple water sparying |
| 
newly designed package |
| 
application: teeth grinding, cutting ,etc |
| 
we are moving in updation the right photo is old type |
After each patient use , maintenance should be done as follows:
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization
Our services:
1,100% pre-tested before delivery. 1:1 replacement for any defective caused by our factory.
2,Specialized in exporting dental equipment with professional sales team. Excellent customer service and technical support.
3,If the product doesn't work please let us know the order number and send the photos/video. After confiming, we will ship a new one to you or return the money back.
4,Please do not hesitate to contact us if you need assistance on your item problem, our online technical support will be there with you in 24 hours.
5,If you interest, send enquiry, we will send you price list and product cataloges.
|
|
Dental Highspeed Handpiece Led Push Triple Spray Torque Push Turbine with CE Images
|
